# Buying a Flip in Arizona: Ask for Permits, Receipts and ROC Licenses

- Link: https://propertyinspectionsplus.com/buying-flipped-house-arizona-permits-receipts/
- Published: 2026-11-07T15:00:00+00:00
- Author: homeinspectordan

If you’re buying a flipped house in Arizona, ask for three things before your inspection
period ends: the permits, the receipts, and the Registrar of Contractors (ROC) license
number of whoever did the work. Fresh paint and new cabinets tell you what the flipper
bought. Paperwork tells you what they fixed. This Phoenix house is a good example
of why that matters.

## What I found under a pretty remodel

This was a 72-year-old Phoenix home, renovated in 2022. Wood frame on a crawl space.
The listing history showed the price jumped more than $250,000 in under a year after
the remodel. From the street it looked great. New stucco job, new roof, a 2022 heat
pump on the roof, a 2022 water heater.

Then you walk in the side door and everything slopes downhill. The fridge leaned.
A wall was pushing out, and the cabinets had been leveled off that crooked wall.
The trim was leveled off a crooked floor. Doors had a tiny gap on one side and a
big one on the other. In a couple of spots I could push my foot into the subfloor
about half an inch.

Under the house, supports weren’t touching the floor joists anymore. There was a
big gap where somebody had done a repair at some point, and the crawl space was 
full of garbage. I also saw loose material on the ground that looked like vermiculite.
The [EPA treats vermiculite insulation as possibly containing asbestos](https://epa.gov/asbestos/my-attic-has-vermiculite-insulation-it-am-i-risk-should-i-take-it-out)
and says it should be “left undisturbed.” I don’t need to crawl through that to 
tell you the house has foundation issues. You can see them from the kitchen.

The rest of the list read like a handyman did a lot of this for a really good price:

 * **Attic.** No insulation at all. Disconnected ducts, so the AC was conditioning
   the attic. Open junction boxes. The new bath fans had no duct to the outside,
   so all that shower moisture was going into the attic.
 * **Dryer.** The dryer vent ran into the crawl space.
 * **Electrical panel.** The dead front cover had been cut and held on with self-
   tapping screws, with what looked like melting. I don’t open a panel that looks
   hazardous. That goes straight to an electrician.
 * **Plumbing.** Copper to CPVC to PEX in different parts of the house, a flex trap
   under the kitchen sink, and mineral deposits at the toilets showing water had
   been there.
 * **Ventilation.** Only two gable vents for the whole attic. No new roof vents 
   went in when the roof was redone.
 * **Exterior.** Stucco cracks running up from a window, caulking gaps, and a gate
   mounted so close it hits the house and won’t open.

A lot of the major components were replaced. But the structure is what everything
sits on. If that’s moving, you get cracks everywhere, and the fresh paint is only
covering the ones that already happened. I’d expect them to keep coming. You talk
about lipstick on a pig. This was a really nice looking house, but once you look
under the covers, it’s fried bacon. My client passed on it.

## Why permits matter on a flip

A permit means a city inspector looked at the work at certain stages. Not perfect,
but it’s somebody outside the flipper’s bubble. On this house, if the floor framing
had been repaired under a permit, there would be a record of who did it and that
someone checked it. Instead the floor was covered with new flooring and trim, and
the structure underneath was left alone.

The City of Phoenix says [construction permits are required for remodels and additions](https://www.phoenix.gov/administration/departments/pdd/residential-building.html),
including things like garage conversions, porch enclosures and patio covers. That
same page links a public search where you can look up permits and applications for
a property. Other Valley cities have their own building departments and lookups,
so search the city where the house sits.

The seller’s disclosure helps too. The Arizona REALTORS [Seller’s Property Disclosure Statement (SPDS)](https://www.aaronline.com/wp-content/uploads/2015/04/seller-property-disclosure-statement.pdf)
asks the seller about work done on the property, whether permits were required and
obtained, and whether the work was done by someone licensed to do it. On a flip,
read that section line by line. If the answers are blank, vague or “unknown,” that’s
your cue to ask.

## Receipts and the ROC license

Receipts show who actually did the work and what they did. “New roof” on a listing
could mean a full tear-off with new underlayment, or a few tiles and some paint.
An invoice tells you which one you’re getting, and it gives you a company name to
look up.

Then check the license. The ROC says a license is required [when a project’s total cost, labor and materials, is over $1,000, or when it needs a local permit](https://www.azroc.gov/news/contracting-arizona-heres-what-you-need-know).
Foundation work, a panel change, a new roof and a full rough-in of plumbing all 
land well over that. The ROC runs a [free contractor search](https://www.azroc.gov/news/dont-get-tricked-check-license)
where you can confirm a license is current. That same ROC article on contracting
notes that eligible homeowners can apply to the Residential Contractors’ Recovery
Fund for up to $30,000 to have work corrected or completed. That only helps if a
licensed contractor did the work. I wrote more about this in [how to check an Arizona contractor before you hire](https://propertyinspectionsplus.com/check-arizona-contractor-license-roc/).

## What to ask for before your inspection period ends

Send this list through your agent as soon as you’re under contract. You want the
answers back while you still have time to act on them.

 * **A scope of work.** What was replaced, repaired or just painted? Roof, HVAC,
   water heater, panel, plumbing, windows, flooring.
 * **Permit numbers.** Especially for structural, electrical, plumbing, roofing,
   HVAC and any added rooms. Then look them up yourself.
 * **Invoices and receipts.** With company names, dates and what was done.
 * **ROC license numbers.** For every contractor on those invoices. Check that each
   one was active and that the license type matches the work.
 * **Warranties.** Roofing, HVAC and water heater warranties, and whether they transfer
   to you.
 * **Any engineer’s report.** If there was foundation or framing work, ask who signed
   off on it.

## How to look at a flip with your own eyes

You don’t need a tool bag to catch a lot of this. On your showing, open and close
every door and look at the gaps around them. Look along the floors and the tops 
of the cabinets. Does that look straight to you? Look at where the trim meets the
floor. If the trim was installed level and the floor keeps sinking, you get gaps
that open up and close as you walk the room. Peek under the sinks for flex traps
and water stains. Fresh paint over everything, including things that shouldn’t be
painted, is always a bad sign.

Then get the full inspection, and on an older flip, I’d add a sewer scope. A remodel
almost never includes the line under the yard. I covered more of the usual flip 
shortcuts in [the worst home flip I inspected](https://propertyinspectionsplus.com/worst-home-flip-inspection/).

## What to do next

 * **Book the inspection early** in your inspection period. The report comes within
   24 hours, which leaves you days to get estimates.
 * **Call the right specialist for an estimate.** A structural engineer or foundation
   contractor for movement, an electrician for panel and wiring issues, a licensed
   plumber for mixed piping and leaks, an HVAC tech for duct problems.
 * **Use real numbers on your BINSR.** With foundation problems, don’t just knock
   $5,000 off and hope. Get estimates. The [BINSR guide](https://propertyinspectionsplus.com/binsr-arizona-home-inspection-repair-request/)
   walks through how to ask for repairs or a credit.
 * **If the seller fixes things, verify them.** Ask for receipts again and consider
   a [reinspection](https://propertyinspectionsplus.com/home-reinspection-after-repairs-arizona/).

A flip isn’t automatically bad. Some flippers do good work and have the paperwork
to prove it. It all depends on what you want to buy, the price, and what you and
the seller are willing to do. Just make sure you know what you’re getting and you’re
not taking somebody’s word for it.

## Flip and remodel inspections in Phoenix and across Arizona

Buying a remodeled or flipped home? Our [residential home inspection](https://propertyinspectionsplus.com/residential-home-inspection/)
covers the structure, roof, attic, electrical, plumbing and HVAC, and a [sewer camera inspection](https://propertyinspectionsplus.com/sewer-camera-inspection/)
checks the line the remodel didn’t touch. We inspect throughout [Phoenix](https://propertyinspectionsplus.com/home-inspector-phoenix-az/)
and [Mesa](https://propertyinspectionsplus.com/home-inspector-mesa-az/). Every home
inspection includes a [termite (WDO) inspection](https://propertyinspectionsplus.com/termite-inspection/)
at no extra charge, plus a 1-year termite warranty through [Firehouse Pest Control in Gilbert](https://firehousepest.com/services/termite-treatment/)
if no active termites are found.

**Buying a home?** [Book your inspection online](https://app.spectora.com/home-inspectors/my-inspection-company-f8d6dbae4e/schedule)
or call [623-399-0079](https://propertyinspectionsplus.com/buying-flipped-house-arizona-permits-receipts/6233990079).

Property Inspections Plus is a [Gilbert, AZ home inspection](https://propertyinspectionsplus.com/)
company led by Certified Master Inspector Dan Pierce. We inspect homes across the
East Valley, the Phoenix metro and the rest of Arizona. See all of our [service areas](https://propertyinspectionsplus.com/service-areas/).
