Every buyer asks me about concrete cracks. Some cracking is normal; the Arizona Registrar of Contractors (ROC) workmanship standards draw the line between normal shrinkage and work the contractor has to fix.
What the ROC standard says
| Problem | ROC acceptable tolerance |
|---|---|
| Cracks in garage floors, patios, driveways and sidewalks | No wider than 3/32 inch (3/16 inch for sidewalks), no more than 1/8 inch vertical displacement. |
| Cracks in cast-in-place stem walls | Cracks over 1/8 inch should be repaired; over 1/4 inch may indicate settlement or failure. |
| Cracks in control joints | Cracking in control joints is expected; over 3/8 inch is excessive. |
| Uneven or wavy floors | No more than 1/4 inch over 10 ft, if gradual. |
| Floors out of level | Within 1/4 inch in any 12 ft run. |
| Ponding on flatwork | Standing water deeper than 3/32 inch (3/16 inch on driveways) 30 minutes after flooding is not acceptable. |
| Stoop or step settling or heaving | More than 1/4 inch is not acceptable. |
| Spalling or pitting | Must not expose aggregate or ruin the appearance. |
| Half-moon cracks at column bases, chipped corners at move-in, excessive crazing, poor finishing | None allowed. |
| Control joints | Expansion joints at the garage and curb; control joints at least 1/5 of the slab thickness and no more than 10 ft apart. |
| Slab height difference between sections | Must not create a trip hazard. |
| Post-tension slab concerns | Review by a structural engineer. |
What I see in Arizona homes
Most Valley homes built since the 1990s sit on post-tension slabs; never drill or core one without locating the cables first. The Post-Tensioning Institute explains why. White powder on concrete is efflorescence, which the standards treat as a natural condition. Cracks that are widening, offset or paired with sticking doors are the ones worth a closer look. The Concrete Network has a good overview of why concrete cracks.
If your home doesn’t meet the standard
Measure the crack with a crack gauge or a coin, photograph it with a date, and send the builder or contractor a written request for repair. If they won’t correct it, you can file a complaint with the Arizona Registrar of Contractors, generally within two years of close of escrow, occupancy or completion. An 11-month warranty inspection records crack widths before first-year repairs run out.
This page is part of our Arizona Workmanship Standards guide. Tolerances are summarized from the ROC Workmanship Standards for Licensed Contractors; the adopted building code takes priority where they differ.
Home inspections in Gilbert and across Arizona
Every home inspection includes a termite (WDO) inspection at no extra charge. We inspect homes in Gilbert, Mesa, Chandler and across the Valley. See all of our service areas.
New build or warranty running out? Book your inspection online or call 623-399-0079.


