Arizona Workmanship Standards: Exterior Siding

In this article

Siding is less common than stucco in the Valley, but it shows up on accent walls, gable ends, older ranch homes and up north in Prescott and Flagstaff. The Arizona Registrar of Contractors (ROC) workmanship standards cover how it should be installed.

What the ROC standard says

ProblemROC acceptable tolerance
Uneven or wavy sidingStraight and flat within 3/8 inch in 10 ft.
Delaminating sidingNone allowed.
Joints not over studsJoints should land on the stud layout.
Improper nailingPer the manufacturer’s instructions or code.
Improper caulkingNone allowed.

What I see in Arizona homes

Sun-cracked caulk, swelling at the bottom edges where sprinklers hit the wall, and siding installed tight to the ground are the usual findings. Fiber cement manufacturers such as James Hardie publish clearance and installation requirements that also affect warranties. Wood siding near soil is an invitation for termites; see our termite inspection.

If your home doesn’t meet the standard

Send the builder or siding contractor a written request for repair with photos. If they won’t correct it, you can file a complaint with the Arizona Registrar of Contractors, generally within two years of close of escrow, occupancy or completion.

This page is part of our Arizona Workmanship Standards guide. Tolerances are summarized from the ROC Workmanship Standards for Licensed Contractors; the adopted building code takes priority where they differ.

Home inspections in Gilbert and across Arizona

Every home inspection includes a termite (WDO) inspection at no extra charge. We inspect homes in Gilbert, Prescott and across the state. See all of our service areas.

Buying a home? Book your inspection online or call 623-399-0079.

Buying a home in the Phoenix area?

Get a Certified Master Inspector on your side. Every home inspection includes a termite inspection at no extra charge, thermal imaging and a report within 24 hours.

Related articles