Cabinets get used every day, so small installation problems get annoying fast. The Arizona Registrar of Contractors (ROC) workmanship standards cover how cabinet doors and drawers should fit and work.
What the ROC standard says
| Problem | ROC acceptable tolerance |
|---|---|
| Doors, drawers or other parts don’t work properly | All operating parts should work. A warp of up to 1/8 inch in 30 inches is acceptable; the contractor repairs or replaces parts within the first year. |
| Door heights don’t line up | Tops of adjacent doors within 1/8 inch. |
| Voids or open knots on exposed surfaces | None, unless that look was requested. |
What I see in Arizona homes
Under the sink is where cabinets get hurt: swollen particleboard bases from slow drain leaks, missing back panels and unsealed plumbing holes that let in pests. I also find loose hinges, drawers off their slides and cabinets not anchored to the wall. In flips, look for new doors on old boxes. The Kitchen Cabinet Manufacturers Association publishes cabinet care and certification information. See also Countertops and Plumbing.
If your home doesn’t meet the standard
Send the builder or cabinet contractor a written request for repair with photos. If they won’t correct it, you can file a complaint with the Arizona Registrar of Contractors, generally within two years of close of escrow, occupancy or completion. An 11-month warranty inspection checks cabinets before first-year repairs run out.
This page is part of our Arizona Workmanship Standards guide. Tolerances are summarized from the ROC Workmanship Standards for Licensed Contractors; the adopted building code takes priority where they differ.
Home inspections in Gilbert and across Arizona
Every home inspection includes a termite (WDO) inspection at no extra charge. We inspect homes in Gilbert, Mesa, Chandler and across the Valley. See all of our service areas.
New build or warranty running out? Book your inspection online or call 623-399-0079.


