Arizona Workmanship Standards: Carpentry, Doors and Framing

In this article

Carpentry covers three sections of the Arizona Registrar of Contractors (ROC) workmanship standards: exterior trim, interior finish work, and framing. These are the numbers I reach for when a door sticks, a floor feels off or a wall looks crooked.

What the ROC standard says

ProblemROC acceptable tolerance
Exterior: crooked or warped fascia, wavy soffits, loose trimExcessive warp is not acceptable; soffits reasonably straight and supported; trim square and secure.
Exterior doors warping, splitting or showing unfinished edgesExterior doors should be sealed on all six sides and finished per specifications; repair and refinish one time in the first year.
Interior trim jointsJoints should fit, be secure, and be filled and sanded.
Doors bind or rub the jambAbout 1/8 inch clearance at the top and sides; repair one time in the first year.
Door swings open or closed on its ownA door should not move when left at 45 degrees.
Warped interior or exterior doorNo more than 1/4 inch in any direction.
Exposed nails on trimNone; nails should be set and filled.
Squeaky or loose floorsNo excessive squeaks or looseness.
Uneven floorsNo more than 3/16 inch in 48 inches; level within 1/2 inch in 12 ft.
Walls not straight or plumbWithin 1/4 inch.
Walls not squareWithin 1/4 inch in 10 ft.
Bowed studs or joistsNo bulge over 3/8 inch in 8 ft.
Cracked interior beamsAcceptable if repaired and structurally sound.

What I see in Arizona homes

Dry desert air shrinks wood fast, so I see open miter joints on trim, gaps at baseboards and doors that start rubbing after the first summer. The bottom edges of exterior doors are often left unpainted, which lets them swell during monsoon season. At a pre-drywall inspection I check framing for bowed studs, cut or notched members and missing hardware while it’s still easy to fix. For door and trim adjustments, a finish carpenter can usually take care of a whole list in one visit; verify their license with the ROC.

If your home doesn’t meet the standard

Use a level and tape measure, photograph the readings and send the builder or contractor a written request for repair. If they won’t correct it, you can file a complaint with the Arizona Registrar of Contractors, generally within two years of close of escrow, occupancy or completion. An 11-month warranty inspection checks every door before first-year repairs run out.

This page is part of our Arizona Workmanship Standards guide. Tolerances are summarized from the ROC Workmanship Standards for Licensed Contractors; the adopted building code takes priority where they differ.

Home inspections in Gilbert and across Arizona

Every home inspection includes a termite (WDO) inspection at no extra charge. We inspect homes in Gilbert, Mesa, Chandler and across the Valley. See all of our service areas.

New build or warranty running out? Book your inspection online or call 623-399-0079.

Buying a home in the Phoenix area?

Get a Certified Master Inspector on your side. Every home inspection includes a termite inspection at no extra charge, thermal imaging and a report within 24 hours.

Related articles