Fireplaces get used only a few weeks a year in the Valley, which means problems often go unnoticed until well after move-in. The Arizona Registrar of Contractors (ROC) workmanship standards cover the two things a fireplace has to do: draw smoke up and out, and close off when it’s not in use.
What the ROC standard says
| Problem | ROC acceptable tolerance |
|---|---|
| Chimney does not draw (smoke comes into the room) | None allowed. |
| Damper does not operate | The damper should move through its full travel and operate easily. |
What I see in Arizona homes
Most newer Valley homes have gas or gas-log fireplaces. I look for a damper clamp on any fireplace with gas logs, missing or damaged spark arrestors and caps on the roof, gaps in the firebox, and stucco or roofing pulled tight against the chimney chase. For wood-burning units, have the chimney swept and inspected before the first fire; the Chimney Safety Institute of America can help you find a certified sweep. Also check that a working CO alarm is installed nearby; see Smoke and CO Detectors in Arizona.
If your home doesn’t meet the standard
Don’t use a fireplace that smokes into the room. Send the builder or contractor a written request for repair. If they won’t correct it, you can file a complaint with the Arizona Registrar of Contractors, generally within two years of close of escrow, occupancy or completion. An 11-month warranty inspection catches fireplace issues before first-year repairs run out.
This page is part of our Arizona Workmanship Standards guide. Tolerances are summarized from the ROC Workmanship Standards for Licensed Contractors; the adopted building code takes priority where they differ.
Home inspections in Gilbert and across Arizona
Every home inspection includes a termite (WDO) inspection at no extra charge. We inspect homes in Gilbert, Mesa, Chandler and across the Valley. See all of our service areas.
New build or warranty running out? Book your inspection online or call 623-399-0079.


