In the Valley, the air conditioner is the most important system in the house. The Arizona Registrar of Contractors (ROC) workmanship standards set minimums for how a newly installed heating and cooling system should perform, and what the installing contractor owes you if it doesn’t.
What the ROC standard says
| Problem | ROC acceptable tolerance |
|---|---|
| Not enough heat | The system should reach 70°F in the center of the room, 5 ft above the floor, under local winter design conditions. |
| Not enough cooling | The system should keep the house roughly 30°F below the outdoor temperature, with 78°F as the indoor benchmark, under design conditions. |
| Noisy ducts | No rattling or oil-canning (metal ducts popping as they heat and cool). |
| Combustion air vent | Sized and installed to the manufacturer’s specifications. |
| Unit too close to a door | Clearances per code and the manufacturer. |
| Filter hard to change | The filter should be easy to reach. |
| Equipment fails | None allowed; the contractor repairs it within the first year or the manufacturer warranty. |
| Condensate line broken or misrouted | None allowed. |
| Water leaking into the system | None allowed. |
What I see in Arizona homes
On new builds I most often find condensate lines that are disconnected, poorly sloped or draining onto the roof, attic air handlers with missing or rusted secondary pans, and return filters jammed into a ceiling grille you need a ladder to reach. In July I measure the temperature difference across the coil and the rooms farthest from the unit. A system that is undersized for the home will struggle every afternoon; proper sizing starts with an ACCA Manual J load calculation.
Keep the system healthy with the ENERGY STAR maintenance checklist and read Dirty HVAC Filter and Return for the cheapest fix on any report.
If your home doesn’t meet the standard
Write down the temperatures, times and outdoor conditions, then send the builder or HVAC contractor a written request for repair. If they won’t correct it, you can file a complaint with the Arizona Registrar of Contractors, generally within two years of close of escrow, occupancy or completion. An 11-month warranty inspection documents problems before first-year repairs run out.
This page is part of our Arizona Workmanship Standards guide. Tolerances are summarized from the ROC Workmanship Standards for Licensed Contractors; the adopted building code takes priority where they differ.
Home inspections in Gilbert and across Arizona
Every home inspection includes a termite (WDO) inspection at no extra charge. We inspect homes in Gilbert, Mesa, Chandler and across the Valley. See all of our service areas.
New build or warranty running out? Book your inspection online or call 623-399-0079.


