Arizona Workmanship Standards: Insulation

In this article

Attic insulation is what stands between a 150°F Arizona attic and your living room ceiling. The Arizona Registrar of Contractors (ROC) workmanship standards keep it simple: insulation has to meet the R-value that was specified and be installed properly.

What the ROC standard says

ProblemROC acceptable tolerance
Attic insulation not uniformInsulation should meet the minimum specified R-value throughout.
Insulation improperly installedNone allowed.
Garage not insulatedNormal, unless insulation was specified in the plans or contract.

What I see in Arizona homes

Blown-in insulation gets displaced by HVAC, solar and cable installers walking the attic, leaving bare spots over bedrooms. I also find insulation missing above the attic hatch, packed against recessed lights that aren’t rated for contact, and pulled back from exterior walls. Thermal imaging shows these gaps clearly on a hot afternoon. The Department of Energy’s insulation guide lists recommended R-values by climate zone.

If your home doesn’t meet the standard

Photograph the bare or thin areas with a ruler for depth, then send the builder or insulation contractor a written request for repair. If they won’t correct it, you can file a complaint with the Arizona Registrar of Contractors, generally within two years of close of escrow, occupancy or completion. An 11-month warranty inspection includes the attic.

This page is part of our Arizona Workmanship Standards guide. Tolerances are summarized from the ROC Workmanship Standards for Licensed Contractors; the adopted building code takes priority where they differ.

Home inspections in Gilbert and across Arizona

Every home inspection includes a termite (WDO) inspection at no extra charge. We inspect homes in Gilbert, Mesa, Chandler and across the Valley. See all of our service areas.

New build or warranty running out? Book your inspection online or call 623-399-0079.

Buying a home in the Phoenix area?

Get a Certified Master Inspector on your side. Every home inspection includes a termite inspection at no extra charge, thermal imaging and a report within 24 hours.

Related articles