Sheet vinyl, vinyl tile and today’s luxury vinyl plank all fall under resilient floor covering in the Arizona Registrar of Contractors (ROC) workmanship standards.
What the ROC standard says
| Problem | ROC acceptable tolerance |
|---|---|
| Nail pops showing through | None allowed. |
| Seams easily visible | Seams should not be readily visible from a standing position; pattern mismatch is not acceptable. |
| Loose seams, lifting edges or bubbles | None allowed. |
| Debris or particles under the floor | None allowed. |
| Material not rated for on-grade slabs | Installed at the contractor’s risk; discoloration or separation from slab moisture is not acceptable. |
| Rough cut edges at cabinets and walls | None allowed. |
What I see in Arizona homes
Luxury vinyl plank is the go-to flooring in Valley flips. I find planks separating at the ends where expansion gaps were skipped, floors that flex over uneven slabs, and sun-faded or heat-buckled planks in front of west-facing sliders. Ask for the product name so you can check the manufacturer’s installation rules. The Resilient Floor Covering Institute publishes industry guidance.
If your home doesn’t meet the standard
Send the builder or flooring contractor a written request for repair with photos. If they won’t correct it, you can file a complaint with the Arizona Registrar of Contractors, generally within two years of close of escrow, occupancy or completion.
This page is part of our Arizona Workmanship Standards guide. Tolerances are summarized from the ROC Workmanship Standards for Licensed Contractors; the adopted building code takes priority where they differ.
Home inspections in Gilbert and across Arizona
Every home inspection includes a termite (WDO) inspection at no extra charge. We inspect homes in Gilbert, Mesa, Chandler and across the Valley. See all of our service areas.
Buying a home? Book your inspection online or call 623-399-0079.


