Plenty of homes in Queen Creek, San Tan Valley, Cave Creek and rural Arizona are on septic. The Arizona Registrar of Contractors (ROC) workmanship standards cover how a newly installed system should be built and placed.
What the ROC standard says
| Problem | ROC acceptable tolerance |
|---|---|
| System fails to operate | Must be built to the requirements of the regulating health or environmental agency. |
| Improper depth or backfill over the leach field | Installed as designed, with no standing water on the surface. |
| Leaking pipe | None allowed. |
| Cleanout wrong size or height | Sized so the tank can be pumped with standard equipment. |
| Collapsed tank or cesspool cover | None allowed, unless caused by others. |
| System too close to the house | Placed as required by the regulating agency. |
What I see in Arizona homes
Buried or paved-over tank lids, vehicles parked over the leach field, and soggy spots or lush grass over the field are the common warning signs. Arizona requires a transfer-of-ownership inspection of the septic system when a home on septic is sold, done by a qualified septic inspector; see the Arizona Department of Environmental Quality. The EPA’s septic system guide covers pumping and care.
If your home doesn’t meet the standard
Send the installer a written request for repair with photos and any pumping reports. If they won’t correct it, you can file a complaint with the Arizona Registrar of Contractors, generally within two years of close of escrow, occupancy or completion.
This page is part of our Arizona Workmanship Standards guide. Tolerances are summarized from the ROC Workmanship Standards for Licensed Contractors; the adopted building code takes priority where they differ.
Home inspections in Gilbert and across Arizona
Every home inspection includes a termite (WDO) inspection at no extra charge. We inspect homes in Gilbert, Queen Creek, San Tan Valley and across the state. See all of our service areas.
Buying a home? Book your inspection online or call 623-399-0079.


