Galvanized steel was the water pipe of choice before copper took over. In the Valley that mostly means homes built before the 1960s, in the older parts of Phoenix, Mesa, Tempe, Glendale and downtown Gilbert. If the original pipe is still in the house, it is well past its expected life.
How to recognize it
- Dull gray metal pipe with threaded fittings. You can see the threads where the pipe screws into an elbow or coupling.
- A magnet sticks to it. It will not stick to copper or plastic.
- Scratch it with a key and it shows silver-gray. Copper shows the color of a penny.
- Look where the water line comes out of the ground at the front of the house, at the water heater and at the hose bibs.
Why it fails
Galvanized pipe is steel with a zinc coating. The zinc wears away over the decades, and then the steel rusts. It rusts from the inside, where you cannot see it. The rust and mineral scale build up until a pipe that started with a three-quarter inch opening may have one the size of a pencil. Eventually the wall rusts through, usually at the threads first.
| What you notice | What is going on |
|---|---|
| Weak flow, worse when two fixtures run at once | The pipe is choked with rust and scale |
| Brown or rusty water after the house sits | Rust is flaking off inside the pipe |
| Good pressure at the hose bib but poor flow inside | The restriction is in the house piping, not the supply |
| Rust blisters and crust at fittings | The pipe is rusting through at the threads |
| Short sections of copper or plastic spliced in | It has already leaked and been patched |
What I look for
- Which pipe materials are visible, and whether the house has been fully or only partly repiped. A remodeled kitchen with new pipe at the sink does not mean the pipe in the walls was replaced.
- Flow at the fixtures with more than one running.
- Rust, crust and active drips at every fitting I can see.
- Copper connected directly to galvanized without the right fitting between them. Two different metals touching speeds up the corrosion.
- The main shutoff valve. See gate valves at the main shutoff.
Plan on a repipe
There is no good repair for galvanized pipe that is rusting from the inside. Patching one leak moves the weak point to the next fitting. The real fix is a repipe, usually with PEX or copper. Get a plumber’s written estimate during your inspection period and use it in your repair request. Here is how the BINSR works. It is also worth a call to your insurance agent, since some companies ask about the age and type of plumbing.
A house with galvanized water pipe almost always has old drain pipe too. See cast iron drain pipes and clay sewer pipe, and my what to expect by year built tool.
Older pipe and lead
The EPA notes that lead pipes, fixtures and solder are more likely in homes built before 1986. A home inspection does not test water for lead. The EPA explains testing on its page about lead in drinking water.
Who to call
A licensed plumber who does whole-house repipes. Check the license at the Arizona Registrar of Contractors. InterNACHI’s life expectancy chart gives a rough idea of how long different pipe materials last.
More Arizona plumbing pipe guides
Water pipe: copper, PEX, CPVC and polybutylene and Kitec. Gas: gas pipe. Drain pipe: ABS and PVC, cast iron and clay sewer pipe.
Plumbing inspections in Gilbert and across Arizona
The visible plumbing is part of every residential home inspection I do, and a sewer camera inspection shows you the drain line you cannot see. Every home inspection includes a termite (WDO) inspection at no extra charge, and your report is delivered within 24 hours. We inspect homes in Gilbert, Mesa, Phoenix and across the Valley. See all of our service areas.
Buying a home? Book your inspection online or call 623-399-0079.


