Gas Pipes in Arizona Homes: Black Steel, CSST and What I Check

In this article

Plenty of Valley homes are all electric. The ones with natural gas usually have it at the water heater, the furnace, the range, the dryer, a fireplace or the pool heater. Gas piping is simple and it lasts, but the mistakes people make with it are the kind you do not want to live with.

The gas pipe materials I see

MaterialWhat it looks likeWhat to know
Black steelDark, rigid pipe with threaded fittingsThe traditional gas pipe. Rusts if it stays wet or sits in soil without protection
Galvanized steelGray, rigid pipe with threaded fittingsAlso used for gas, often outside at the meter
CSSTFlexible corrugated stainless steel tubing in a yellow or black jacketRuns through attics and walls in many newer homes. Has to be electrically bonded
Flexible appliance connectorA short, flexible line, often yellow coated, between the shutoff valve and the applianceNot the same thing as CSST. Should not pass through walls, floors or cabinets
PolyethyleneYellow plastic pipeUnderground only, usually from the meter to a pool heater or outdoor kitchen

CSST and bonding

CSST has thin walls. If lightning strikes on or near a house, electrical energy can jump to the tubing and burn a hole in it. The protection is bonding: a heavy copper wire clamped to the gas piping and tied into the home’s electrical grounding system. Manufacturers and current codes require it. On a home with CSST I look for that bonding clamp and wire, and if I cannot find one I recommend a licensed electrician evaluate it.

What I look for

  • A shutoff valve at every gas appliance, in the same room and easy to reach.
  • A sediment trap. The short capped leg of pipe below the connection at a water heater or furnace. It catches debris before it reaches the gas valve.
  • The appliance connector. Old uncoated brass connectors, kinked connectors and connectors run through a wall or cabinet side all get written up.
  • Rust. Especially on pipe near sprinklers, at the meter and on rooftop lines to a furnace or package unit.
  • Support. Rooftop and attic gas lines should be supported, not lying loose or holding up something else.
  • Open or uncapped lines. A gas stub with a valve but no cap, where a dryer or range used to be, is a common one.
  • Gas odor and leaks at accessible connections. I check with a combustible gas detector.
  • Homeowner work. Water pipe fittings, hose clamps and the wrong sealant on gas threads.

A home inspection is a visual check of the gas piping I can see and reach. It is not a pressure test of the whole system. If I find a leak or a line I do not trust, the next step is a licensed plumber or the gas company.

The appliances on the other end

Gas piping is only half the picture. Every gas appliance also needs proper venting and combustion air, and every home with gas needs working carbon monoxide alarms. See smoke and CO detectors in Arizona, how long a water heater lasts, fireplace and chimney safety and dryer vent safety.

If you smell gas

Get everyone out first. Do not flip light switches, use the garage door opener or start a car on the way. Once you are a safe distance away, call 911 and the gas company. Southwest Gas, which serves most of the Phoenix area, lists the steps and its 24-hour number on its safety page.

Who to call

A licensed plumber for gas piping repairs and a licensed electrician for bonding. Check any license at the Arizona Registrar of Contractors. Gas work generally needs a permit and an inspection from your city, so ask for the paperwork on any gas line that was added or moved. See permits and receipts on a flipped house and Arizona workmanship standards for plumbing.

More Arizona plumbing pipe guides

Water pipe: copper, PEX, CPVC, galvanized steel and polybutylene and Kitec. Drain pipe: ABS and PVC, cast iron and clay sewer pipe.

Plumbing inspections in Gilbert and across Arizona

The visible gas and water piping is part of every residential home inspection I do. Every home inspection includes a termite (WDO) inspection at no extra charge, and your report is delivered within 24 hours. We inspect homes in Gilbert, Mesa, Chandler and across the Valley. See all of our service areas.

Buying a home? Book your inspection online or call 623-399-0079.

Buying a home in the Phoenix area?

Get a Certified Master Inspector on your side. Every home inspection includes a termite inspection at no extra charge, thermal imaging and a report within 24 hours.

Related articles

Sewer camera showing cracked cast iron drain pipe under an Arizona home
Arizona Building Materials
homeinspectordan

Cast Iron Drain Pipes in Older Arizona Homes

Cast iron drain pipe under an older Arizona home rusts from the inside. The warning signs, what a sewer camera shows, and what a Gilbert home inspector recommends.

Sewer camera scan sludge abs pipe
Arizona Building Materials
homeinspectordan

ABS and PVC Drain Pipes in Arizona Homes

Black ABS and white PVC are the drain pipes in most Arizona homes. How to tell them apart, what goes wrong, and what a Gilbert home inspector and a sewer camera look for.