How Old Is My Rheem or Ruud AC or Heat Pump? Serial Numbers, Eras and Recalls

In this article

Rheem and Ruud air conditioners, heat pumps and air handlers are the same equipment with different badges, built by Rheem’s air conditioning division. The date is easy to find once you know to look for the letter in the middle of the serial number. Here is how to read it, what each era means for a home in the Valley, and which recalls to check.

Who makes what

  • Rheem. Founded in 1925. It launched its Rheemaire central heating and air conditioning in 1956, opened its air conditioning division in Fort Smith, Arkansas in 1970 and added heat pumps in 1979. Japan’s Paloma has owned Rheem since 1988.
  • Ruud. Part of Rheem since about 1960. Ruud models match Rheem models and are sold through a separate dealer network.
  • Sure Comfort and WeatherKing. Rheem’s value brands.
  • Frigidaire, Maytag, Intertherm, Miller and Gibson. Rheem bought Nortek Global HVAC, the maker of these brands, in October 2024. Those units have their own serial format, covered in my Intertherm, Frigidaire and Maytag guide.

Sources: the Building Center’s Rheem page and Rheem’s Nortek announcement.

How to read the serial number

The data plate is on the side of the outdoor unit and on the front or inside the door of the air handler or furnace. Rheem air conditioning serial numbers have used a letter followed by four digits: the week, then the year.

LayoutExampleHow to read it
Newer units: a letter at the startW291013412W is the plant. 29 = week 29, 10 = 2010.
Older units: a letter in the middle7351 M2806 16735Find the letter in the middle (often M, F, G, W or N). The four digits after it are the week and year: week 28 of 2006.
Before about 1974732…Year, then month: February 1973.

The CPSC reads it the same way. Its Rheem recalls describe the date code as the four digits after the M in the middle of the serial number, with the week first and the year second. Don’t confuse this with Rheem water heaters, which use month and year.

AC eras every Arizona buyer should know

These federal rules apply to every brand, so the build date tells you a lot about what is inside the unit.

WhenWhat changedWhat it means for you
1992First federal efficiency minimum: 10 SEER for split systemsA unit this old is long past its life in our heat.
January 23, 2006The minimum rose to 13 SEER.Newer units use noticeably less power.
January 1, 2010New AC equipment could no longer be built to use R-22.An R-22 unit was made before 2010.
January 1, 2015Split ACs installed in Arizona had to reach 14 SEER, plus an EER minimum for hot weather.Arizona is in the Department of Energy’s Southwest region, with the toughest rules.
January 1, 2020R-22 production ended.Recharging an R-22 system relies on recycled refrigerant and is expensive. Budget for replacement.
January 1, 2023A new test (SEER2). Southwest split ACs under 45,000 BTU must reach 14.3 SEER2 plus an EER2 minimum.Labels from 2023 on show SEER2 numbers, which run a bit lower than the old SEER.
January 1, 2025New home systems can no longer be built for R-410A. Most now use R-454B or R-32.R-410A units built before 2025 can still be installed and serviced. Ask what refrigerant a “new” unit uses.

Sources: the Department of Energy’s central air conditioner standards FAQ and the EPA’s pages on the R-22 phaseout and refrigerant transition. Rheem-specific milestones: scroll compressors across its home lineup from 1994, and a full line of 14 SEER condensing units and heat pumps in 2009.

Models you will see

Model starts withWhat it is
RA (Rheem), UA (Ruud)Split system air conditioner
RP (Rheem), UP (Ruud)Split system heat pump
RBHA, UBHA, WBHA (1990s)Electric air handlers
RBEA, UBEA, WBEA (1990s)Electric furnaces

A two-digit number after the letters is usually the SEER (RA16 is a 16 SEER line), and a size code such as 36 means 36,000 BTU, or 3 tons. Rheem groups its lines into series such as Prestige, Classic Plus and Classic, and Ruud uses names such as Ultra and Achiever.

Recalls to check

1999: Electric furnaces and air handlers (fire hazard)

  • What: About 135,000 units. The electric heating elements can break apart and blow small bits of molten metal through the ducts into the house.
  • Models: Electric furnaces RBEA, UBEA, WBEA and WBEMA, and air handlers RBHA, UBHA, WBHA and WBHMA, installed in downflow or horizontal positions.
  • Date codes: 3592 through 4595, the four digits after the M in the serial number (week 35 of 1992 through week 45 of 1995).
  • Fix: A free new blower assembly with an improved heating element.

Air handlers with electric heat strips are common in Valley heat pump homes, and a unit from the early 1990s is well past its life anyway. Details: CPSC recall notice.

2009: Oil-fired furnaces

Rheem Classic and Ruud Achiever oil furnaces (models ROBF and ROPF) built 2006 through 2008 were recalled for a wiring problem (CPSC 09-104). Oil heat is almost never used in Arizona.

When I wrote this, Rheem’s recall page listed no current air conditioner or heat pump recalls. New recalls can come out at any time, so search your model number at cpsc.gov/Recalls.

What I check on the AC at an inspection

  • Both data plates, outdoor and indoor, for age, size and refrigerant type. The two halves of a system are often different ages.
  • The breaker size against the maximum listed on the data plate.
  • How well it cools, measured as the temperature difference between the return and supply air.
  • The condensate line and pan, which can leak into ceilings in attic installs.
  • The filter. See why a dirty AC filter matters in Arizona.
  • Rooftop units and the roof around them. See what a rooftop AC did to an aging roof.

An older AC that works is a budget item, not a defect. Related: what a home warranty did with an old AC. When it is time to replace, check for rebates from SRP or APS, and verify the contractor with the Arizona Registrar of Contractors.

Other brands: Carrier, Bryant and Payne, Trane and American Standard, Lennox, Goodman, Amana and Daikin, York, Coleman and Luxaire and Intertherm, Frigidaire and Maytag.

Home inspections in Gilbert and across Arizona

At every home inspection I photograph the HVAC data plates, so the ages and model numbers are in your report. We inspect homes in Gilbert, Mesa, Chandler and across the Valley. See all of our service areas.

Buying a home? Book your inspection online or call 623-399-0079.

Buying a home in the Phoenix area?

Get a Certified Master Inspector on your side. Every home inspection includes a termite inspection at no extra charge, thermal imaging and a report within 24 hours.

Related articles