If you are buying a Valley home built from the 1950s through the 1980s, three electrical items come up again and again: Federal Pacific panels, Zinsco panels and aluminum branch wiring. All three can be dealt with. You want to know about them before your inspection period ends, because they affect safety, cost and sometimes insurance.
Federal Pacific Stab-Lok panels
Federal Pacific Electric (FPE) panels with Stab-Lok breakers were installed in a huge number of homes. The concern is that the breakers may not trip when they should. A breaker that doesn’t trip can’t protect the wire from overheating. Look for the FPE name on the panel door and red strips across the breaker handles.
Zinsco and Zinsco-style panels
Zinsco panels, also sold under the Sylvania name, have a different problem. The breakers can lose their grip on the bus bar, overheat and even fuse to it. From the outside the panel can look fine. Brightly colored breaker handles are the usual clue.
With either brand, I report the panel, take pictures and recommend a licensed electrician look at it. Most electricians recommend replacing them. You can read the federal government’s history with these products at the Consumer Product Safety Commission.
Aluminum branch wiring
From about 1965 to 1973, many homes were wired with single-strand aluminum instead of copper for the regular outlet and light circuits. Aluminum expands and contracts more than copper, and connections at outlets, switches and splices can loosen and overheat over the years.
Aluminum itself is not banned, and the large aluminum cables feeding your panel, AC or range are normal and fine. The concern is the small branch wiring. The CPSC recognizes a few repairs, including full copper rewiring and special connectors installed at every connection. Simply swapping outlets is not one of them.
What it means for a buyer
- Get a bid. Have a licensed electrician price the fix during your inspection period. Check the license at the Arizona Registrar of Contractors.
- Call your insurance agent. Some insurers won’t write a policy, or charge more, with these panels or wiring in the house. Find out before closing.
- Negotiate. A panel replacement is a clear, easy-to-price item for the BINSR.
- Don’t panic. A house that has stood for 50 years won’t burn down this weekend. It is a known risk with a known fix.
Other electrical items I see in older homes
- Missing GFCI protection near water.
- Two wires under one breaker screw.
- Open junction boxes in the attic.
- Three-prong outlets with no ground.
- Panels crowded by add-on circuits from a remodel.
The NFPA and the Electrical Safety Foundation both have good homeowner guides. For a look at an older Valley home from top to bottom, see my 1973 Mesa home inspection. I open the panel on every home inspection where it is safe to do so.
Buying a home? Book your inspection online or call 623-399-0079.
Property Inspections Plus is a Gilbert, AZ home inspection company led by Certified Master Inspector Dan Pierce. We inspect homes across the East Valley, the Phoenix metro and the rest of Arizona. See all of our service areas.


