If the house you’re buying was built between the late 1970s and the mid-1990s, look for gray plastic water lines. That’s probably polybutylene. If it was built from about 1995 into the mid-2000s, look for orange and blue lines with brass fittings at the water heater. That’s probably Kitec. Neither one is guaranteed to leak next week, but both have a long record of failing, and both are worth finding before your inspection period runs out.
Polybutylene still turns up in Valley homes, and Kitec went into a lot of Southwest homes built in the boom that followed. Here’s how to spot them, why they fail, and what I’d do about it if it were my house. If you want a quick picture of what else comes with a home’s age, see what to expect by year built.
Why these two pipes have a bad name
Polybutylene, or PB, was made from 1978 to mid-1995 and went into up to 10 million U.S. homes, according to InterNACHI. The trouble starts inside the pipe. Disinfectants in the water break the plastic down, it flakes, and small fractures grow outward until the pipe leaks. Class-action suits over it paid out up to $1 billion.
This isn’t just a back-East problem. ABC15 reported that Valley plumbers still find polybutylene in homes, sometimes across whole subdivisions. One Glendale buyer in that story had a pipe burst in her garage four months after closing, then a kitchen line burst six weeks later. The settlement money that once paid for repairs has ended, so today the bill lands on the owner.
Kitec is a different animal. It came out in 1995 from a company called IPEX, and it’s plastic pipe with a thin aluminum layer inside so it bends and holds its shape. As the Las Vegas Sun explained, the pipe usually isn’t what fails. The brass fittings are. Zinc leaches out of the brass, a process called dezincification, and that leaves a blockage that can restrict flow, leak or break. In Las Vegas, the manufacturer’s attorneys blamed the area’s hard water. Our water here is hard too. I can’t tell you that makes Kitec fail faster in the Valley, but I wouldn’t bet a ceiling on it.
How to spot polybutylene
- Color. Arizona PB is usually gray, per ABC15. InterNACHI notes it can also be white, silver, black or blue, so color alone doesn’t settle it.
- Markings. Look for “PB2110” printed on the pipe, or “Qest” or “PB.”
- Fittings. On Valley installs you’ll often see copper crimp rings and copper elbows.
- Size and use. It’s flexible water supply line, roughly 1/2 inch to 1 inch. It’s never used for drains.
- Where to look. At the water heater, under sinks, behind toilets, and at the main shutoff. The plumber in the ABC15 story said to check the attic above the water heater, and that’s where I spend time too.
One catch. InterNACHI points out that PB is sometimes tied to short copper stub-outs where it comes through the wall at a fixture. So seeing copper under the bathroom sink doesn’t clear the house. You have to follow the lines back.
How to spot Kitec
- Color. The most common setup is blue for cold and orange for hot, according to the Greater Albuquerque Association of REALTORS. It was also sold in red, gray and black.
- Markings. The pipe is usually stamped “Kitec” or another name for the same product, like PEX-AL-PEX or PlumbBetter.
- Fittings. Brass compression fittings, often with a capital “KT” on them.
- Where to look. The pipes going in and out of the water heater first, then the water softener loop.
- Warning signs. White crusty residue on the outside of a fitting, or pipe that’s blackened or bulging. Problems tend to show up near the water heater.
What I do when I find it
I name it in the report, show you where I saw it, and recommend a licensed plumber come out for an estimate. That’s my job. I’m not the plumber, and I can’t see inside the pipe. Neither can anybody else without shutting the water off and cutting a piece out, which InterNACHI also notes. So “no leaks today” is not a clean bill of health on these materials.
How serious is it? Not the end of the world if you plan for it. But this is water, and water is the thing I worry about most in an Arizona house. A fitting lets go in the attic, the water soaks the insulation and drywall, the wood stays wet, and now you’re inviting termites too. My thermal camera can pick up wet drywall before it stains, like it did on this 1997 Glendale home, but that only finds a leak that’s already happening.
While I’m at the plumbing, I look at two more things that matter if you end up repiping:
- The main shutoff. A lot of older homes still have a gate valve there. I don’t like gate valves because they tend to seize up on the inside right when you need them. I like to see a quarter-turn ball valve.
- Water pressure. When I test it, anything over about 80 PSI gets a recommendation for a pressure regulator. High pressure is hard on every fitting in the house, old or new.
Insurance, repiping and your repair request
InterNACHI notes that no regulation requires anyone to replace polybutylene, but many plumbers recommend it, and owners “might face higher insurance premiums or be denied coverage entirely.” So call your insurance agent during the inspection period and ask the question straight out. Don’t find out after closing.
The settlement money isn’t coming to the rescue either. The Kitec settlement’s claim deadline was January 9, 2020, and the polybutylene payouts have ended. The plumber in the ABC15 story recommended repiping the whole house rather than chasing leaks one at a time, and that Glendale owner paid $7,500 for hers in 2019. Your number will be different, so get a real estimate.
Then decide how to handle it on your BINSR repair request. Sometimes it’s easier to just take a credit, because then you pick the plumber and you control the quality of the work. If the seller does the repipe, ask for the receipts and the plumber’s license number.
One more thing from the field. On a 1998 house in Surprise, PEX had been run to a new water heater, and the bonding wire was taken off and never reinstalled. After any repipe, make sure the bonding gets reconnected. That’s a question for the plumber and an electrician.
What to do before your inspection period ends
- Look at the water heater and the attic above it. Gray pipe or orange and blue pipe with brass fittings is your cue.
- Have a licensed plumber confirm it and give you an estimate. Ask for a whole-house repipe price, not just a patch.
- Check the license. The Arizona Registrar of Contractors recommends checking the contractor’s license record, making sure the license class covers the work, and getting written estimates from at least three contractors. Here’s how I check a contractor.
- Call your insurance agent. Ask whether this pipe affects coverage or your premium.
- Put it in your BINSR. Repair or credit, decide before the deadline.
- After a repipe, keep the receipts, ask for a quarter-turn main shutoff, and confirm the bonding is back on.
Plumbing checks on home inspections in Gilbert and across Arizona
A residential home inspection covers the visible water supply lines, the water heater and the main shutoff, and a thermal imaging inspection can help track down hidden leaks. I inspect older homes all over the Valley, from Glendale to Phoenix. Every home inspection includes a termite (WDO) inspection at no extra charge, plus a 1-year termite warranty through Firehouse Pest Control in Gilbert if no active termites are found.
More Arizona plumbing pipe guides: water pipe: copper, PEX, CPVC and galvanized steel. Gas: gas pipe. Drain pipe: ABS and PVC, cast iron and clay sewer pipe.
Buying a home? Book your inspection online or call 623-399-0079.
Property Inspections Plus is a Gilbert, AZ home inspection company led by Certified Master Inspector Dan Pierce. We inspect homes across the East Valley, the Phoenix metro and the rest of Arizona. See all of our service areas.


